How To Clean Drone Motors | Clean Motors Now

how to clean drone motors

Are you a drone owner looking for tips on how to clean drone motors? 

Keeping your drone motor performance in tip-top shape can be challenging – after all, dirt and grime usually build up quickly when using these popular devices.

But fear not! Cleaning your drone’s motors and motor shaft can be simple if you know what you’re doing. 

In this blog post, we will walk through step-by-step instructions on how to effectively clean all of your drone Motors so that it’s running as smoothly long time. 

From preparing for the cleaning process to choosing the right cleaning products – we have you covered with everything that can help ensure optimal performance from start to finish! 

Ready to get started? Let’s go!

Why cleaning drone motors is important?

how to clean drone motors

When it comes to keeping your drone’s motor performance good, prevention is key! After all, dirt and dust particles lurking there can cause severe damage if neglected. 

By regularly cleaning the motors, you ensure that your drone operates at its highest efficiency level and you stay safe from potential problems caused by dirt and grime build-up. 

Plus, the bonus is that regular cleaning extends the life of your drone and keeps it performing at its absolute best!

Let’s not forget about the circuit boards and Lipo batteries, the powerhouse of your drone! They power their flight and performance, so it’s crucial not to neglect their maintenance. 

Ignoring them can result in reduced flight time and overall performance issues. 

That’s why cleaning your drone’s batteries and motors is a good idea to ensure they work efficiently for even longer! 

Keep your drone flying high and enjoy the best performance possible!

How to clean drone motors? (In Short)

  1. Turn off your drone and disconnect the drone battery. 
  1. Use a soft brush to remove any visible dirt or grime from the outside of the motors, being careful not to damage them. 
  1. Gently wipe down the motor exteriors with a microfiber cloth dampened with some water. 
  1. Connect the battery back up to your drone and turn it on. 
  1. Use a compressed air canister or an electronic motor cleaner to clean the interior of the motors. 
  1. Clean any residue with a soft brush and damp cloth, if necessary. 
  1. Reassemble your drone and test it out!

Tools you need to clean a drone motor

how to clean drone motors

No matter what type of drone you own, cleaning its motors and motor shaft is a breeze! You only need a small toolkit to get the job done. Check out the following list:

Soft Brush

For optimal cleaning of the motors’ exterior, it is crucial to have a soft brush on hand. 

When using the brush, remember to maintain a gentle touch to avoid any damage to delicate parts. 

Microfiber Cloth

A microfiber cloth is for gently wiping away dirt and grime without damaging the exterior of the motors. 

Make sure to dampen it slightly with a bit of water, as this will help to lift off any stubborn particles.

Compressed Air or Electronic Motor Cleaner

You will need a compressed air canister or an electronic motor cleaner for deeper cleaning. 

Both should be able to get into the small crevices and openings of the motors to remove dust and grime.

With these few items in your small toolkit, you can quickly and efficiently clean your brushless drone motor and keep it running at optimal levels.

Prepare the motor for cleaning 

how to clean drone motors

It’s essential to disconnect the motor from the drone’s battery and any other components, such as propellers, before attempting to clean it. 

This will help reduce the risk of electric shock and potential damage to your drone.

Visual inspection of the drone motor and motor windings condition before cleaning is a pro tip to identify any potential issues that may require attention during the cleaning process. 

This is especially important for FPV drone motors which are crucial for precision flying.

Clean the outside of the motor using a soft cloth, vacuum cleaner, and canned air

how to clean drone motors

Once you’ve made sure that the motor is disconnected from any other components, Clean the outside of the motor using a soft cloth, vacuum cleaner, and canned air is a good idea.

soft cloth

To effectively remove dirt and dust that may have accumulated on the motor’s exterior, it is recommended to use a soft cloth for wiping.

Vacuum Cleaner 

To remove large particles like dust or pet hair around the motor and motor bearings, a vacuum cleaner is a great tool. 

Remember to use the lowest setting to prevent any potential damage to the motor.

Canned Air 

Using compressed air to remove any particles that might be trapped inside the motor’s and motor bearings crevices or openings. 

Remember to direct the air in short bursts, avoiding extended focus on one area to prevent potential damage.

Disassemble the motor components and inspect them for signs of wear or damage

how to clean drone motors

To ensure your brushless drone motor performance is in good condition, you must take them apart and visual inspection for each component. 

You can use a soft brush or a microfiber cloth dampened with water to remove any dirt or debris from the parts. 

Check for signs of wear or damage on the components as you go. 

If any components show signs of wear or damage, such as cracking or fraying, replace them before reassembling the motor and motor shaft.

DJI motors and brushless drone motors often require more attention during this step, as they have intricate components like stator coils and motor windings that must be kept in good condition for optimal performance.

Use a cotton swab dipped in rubbing isopropyl alcohol to clean around sensitive parts

When cleaning sensitive parts of your drone, such as the brushless motors, motor bearings, propellers and stator coils, it’s essential to be extra careful. 

Using a cotton swab dipped in rubbing isopropyl alcohol can help you reach small nooks and crannies that may not be accessible with a brush or cloth. 

Take care not to rub too hard, or you may damage the parts.

When all the cleaning is done, don’t forget to reassemble your brushless drone motor according to the manufacturer’s instructions and test it for proper operation. 

Reassemble the motor components and test their functionality before reattaching them to your drone

Once you’ve thoroughly cleaned and inspected all your FPV drone motor components, it’s time to assemble them again. 

Ensure to follow the manufacturer’s instructions for reassembly and double-check that all parts have been correctly placed before proceeding. 

Once completely assembled, you should test the motor before reattaching it to your drone. 

Running the motor on a test stand or in a safe environment can help you ensure that everything is working correctly and no parts have been damaged during the cleaning process. 

Store your drone in a cool, dry place to help prevent future maintenance needs

Since your drone has been cleaned and you’re sure everything is working correctly, storing it in a cool, dry place is essential. 

Moisture and heat can cause damage to your FPV drone motors over time, leading to expensive repairs or replacement parts. 

Also, clean off any dust or dirt that may accumulate on your drone and its motor components after each flight. 

This easy step can help prevent any build-up of debris which can hinder the performance of the brushless motors and other parts.

Frequently Asked Questions

What type of cleaning supplies should I use to clean my drone motors?

You should always use a soft cloth and mild detergent, such as dish soap or damp cloth when cleaning your FPV drone motors. 

Avoid using any abrasive or harsh chemicals which can damage the parts.

Should I disassemble my drone motors when cleaning them?

It is often best to disassemble the motor components before cleaning, as this will allow you to get into nooks and crannies that may not be accessible otherwise. 

Be sure to follow the manufacturer’s instructions for disassembling your FPV drone motors so that they are correctly put back together once cleaned.

How often should I clean my drone motors?

It is best to thoroughly clean your drone brushless motors every few months or so, depending on how often you fly. 

This will help ensure that your drone components are free of dust and debris, which can interfere with the performance of the motors. 

Additionally, by keeping an eye on the condition of your motors, you can identify any signs of wear and tear that may need to be addressed.

Is there anything else I should do to maintain my drone motors?

In addition to cleaning, you must inspect your drone’s motors and other components regularly. 

Ensure all the parts are properly secured and in good working order, then check for any signs of wear and tear or corrosion. 

If any issues are identified, address them as soon as possible to keep your drone in good condition.

What is the lifespan of DJI drone motors?

The life of DJI motors will vary depending on the conditions they are used in and how often you fly. 

On average, most DJI motors should last between 1-5 years with proper maintenance and care. 

In order to maximize the lifespan of your drone motors, be sure to clean them regularly and inspect for any signs of wear and tear. 

Additionally, it is important to use your drone responsibly and avoid overworking the motors by flying in windy conditions or carrying heavy payloads. 

With proper maintenance, you can ensure that your DJI motors last as long as possible and give reliable performance.

Conclusion (How to clean drone motors)

Cleaning and maintaining your drone’s batteries and drone motors is vital for keeping them in top condition.

Use a soft cloth and mild detergent, disassemble the components when necessary, and inspect regularly for signs of wear or corrosion. 

Cleaning your drone battery is equally essential, directly affecting flight time and drone performance. 

Incorporate drone battery cleaning into your maintenance routine for the best results. 

Proper maintenance of your lipo batteries motor bearings and circuit boards is also essential for keeping your drone in peak condition. 

Additionally, using an ultrasonic cleaner can help you achieve a thorough clean of delicate components like drone’s batteries motor windings, and electrical components. 

Remember, a well-maintained drone and drone body will provide you many hours of enjoyable flight with FPV drones or any other type.

In conclusion, regular maintenance of your drone motors propellers and related components through ultrasonic cleaner and other tools is vital for ensuring optimal performance and a long lifespan for your beloved drone. 

Following these cleaning steps and taking care of your drone body and drone’s motors, you can enjoy smooth long time flights and breathtaking aerial experiences.

hope you’ve gained valuable knowledge and now clearly understand how to clean drone motors.

Happy Flying!

Leave a Reply

Your email address will not be published. Required fields are marked *

Hi, I’m Hamid,
And I’m passionate about drones. As a reviewer and writer, my mission is to share valuable information with drone enthusiasts worldwide.

Latest Posts